Repartition Path
Subdivide or fuse selected edges, by resolution.
Useful to prepare straight edges for bending. Subdividing increases the plasticity of the edgepath. This enables softer transitions. After subdividing, use other commands to control path transitions. For instance Path control commands.
Type: Prep, PathMenu: Extensions > Landshape > Prop > Repartition Path
Input
- Raw naked edges.
- Naked edges in a group.
Control Resolution
The resolution is a target. Landshape approximates edgelengths to target. Set target resolution in the VCB.
Last edited 2026-02-11